-
I'm selling my stunning 7 String Headless Guitar, it's a fantastic guitar, but the scale length is too long for stretch chords.
Price Drop to £500.
The Body is two Pieces Ash.
The Neck is one piece of Wenge with Padauk stripe.
24 Jumbo Stainless Steel frets.
The Body and Neck were bought from Scot Woodcock at WSM Guitars, Hastings, England.
Body & Necks | WSM Guitars
Neck multi-scale fan fret:
27 inch scale on the Bass side
25.5 inch scale on the Treble side.
Action: Bass 1.7mm and Treble 0.8mm at the 12th fret.
The body is finished in Osmo Polyx finish.
The bridge is an excellent Koloss fan frets bridge.
The nut string clamp is a brass double hex bolt.
The neck is bolted to the neck with stainless steel bolts and threaded inserts.
The pickup is a low output PAF type for fan frets. (Easy connector wiring for adding an alternative pickup.)
The cavity control has magnetic cover.
The tone pot is a bit stiff when rotating, the tone cap can easily be changed to any value you wish.
The two switches on the front are not wired, they were going to be a kill switch and coil split, but were never wired.
There is a tool scrape on the back on the neck at behind the string clamp. Nothing serious, only cosmetic, see picture.
Pictures say everything else.
Scrape at back top of the neck.Last edited by GuyBoden; 06-24-2024 at 03:33 AM.
-
06-18-2024 09:48 AM
-
There isn't any interest in buying this guitar, so I've put this stunning guitar on Ebay for £500.
Make a lower offer for a forum low price.
7 string Headless Guitar - Solid Ash Body and Wenge with Padauk stripe neck. | eBayLast edited by GuyBoden; 06-24-2024 at 03:35 AM.
Targeting thirds in dominant 7ths
Today, 10:42 AM in Improvisation